Switching ON/OFF the Belt and Disc Sander
1. Make sure that the mains power in your area
corresponds with the type labelled on the
machine.
2. The ON/OFF switch (21) is situated above the
switch box. To switch on, press
switching off press O .
This machine is equipped with a safety switch that
contains a low voltage circuit breaker. This avoids
unintentionally starting up the machine.
Dust Collection System
For dust collection two adapters are provided with the belt and disc sander.
1. Use the dust collection whenever possible.
2. If no dust collection system or vacuum cleaner is available while sanding,
protect yourself by wearing a dust mask.
Operation
I
and for
17
Adaptors for Dust Collection