Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety Notes
First switch off the belt and disc sander before making any adjustments
and when the unit is not in use, after finishing work and maintenance and
then disconnect the power lead from the mains supply.
In the event of an electrical or mechanical malfunction, immediately switch
off the sander and do not use it further.
Do not disassemble the machine and do not try to repair it yourself. Have
the unit repaired by a professional or contact our customer support ser-
vice. Always use original replacement parts.
Keep your work area clean.
Do not use the belt and disc sander near flammable liquids, gases or dust.
Sparks may ignite the dust or fumes.
Never use the cable to carry the belt and disc sander. Keep the cable
away from hot, sharp edges and moving parts.
Do not wear jewellery and loose clothing. Tie up long hair. Work on solid
ground.
Work in well ventilated rooms. Whenever possible use the dust
collection systems. Some coatings and wood dust may be
harmful and toxic. According to your use, wear gloves and
safety goggles. If the dust collection system cannot be
attached, wear dust mask.
Take care that the belt and disc sander cannot tip over or move while
sanding long or heavy objects. If necessary, fasten the belt and disc
sander to a supporting surface.
Make sure the sanding belt is working in the right direction. Make sure that
the sanding disc or sanding belt is not damaged.
Make sure the sanding belt is firmly and correctly positioned and cannot
run off the pulleys.
12
Werbung
Inhaltsverzeichnis
