Herunterladen Inhalt Inhalt Diese Seite drucken

Setting The Volume; Choosing A Station; Station Search With Automatic Memory (Ams); Manual Station Search - Silvercrest SURF 600 A1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SURF 600 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Setting the volume

When the device is switched on, the volume can be set in increments of "00" (minimum volume) to "16"
(maximum volume). Turn the multi-function controller (1) anti-clockwise to lower the volume or clockwise to
increase it. Please note that regulating the volume is only possible when the device is in clock mode.

Choosing a station

To ensure the best possible reception, unwind the cable antenna (10) fully before choosing a station. The
reception can be optimised using the cable antenna.

Station search with automatic memory (AMS)

The most convenient way of finding and storing stations is the automatic station search with automatic memory system
(AMS function) for storing the stations.
In active mode, press the multi-function controller (1) three times. "Aut" will be shown on the display
(11).
Turn the multi-function controller (1) slightly to activate the station search with AMS.
The search begins at the lower end of the frequency band. As soon as a station with a strong signal is
found, this is stored and the memory position used will be shown briefly on the display (11).
"AMS" continues and more stations are saved in the same way.
Once the higher end of the frequency band is reached, the search ends.
The first 20 stations found will be stored directly in memory positions "P01" to "P20".
In case all 20 storage spaces are taken the station search is interrupted at the current frequency and the
channel is stored on storage space „P01".
Please note that memory positions already occupied will be overwritten.

Manual station search:

This function can be used to manually search for a station with a strong signal, then listen to it and, if
necessary, store it.
In active mode, press the multi-function controller (1) twice. The search icon (14) will show on the
display (11).
Turn the multi-function controller (1) slightly to activate the manual station search. The search icon (14)
will flash during the search. The search always starts at the frequency it was last set. The direction of
the search will change depending on whether you turn the multi-function controller (1) clockwise or
anti-clockwise direction.
SilverCrest SURF 600 A1
English - 15

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis