Westfalia DIY-12 Bedienungsanleitung Seite 34

DIY-12.book Seite 33 Dienstag, 27. März 2007 3:47 15
DIY-12
7.2 Connecting the alarm system
You will find a summary of the wiring in the circuit diagram in fig. 5, page 3.
No. Explanation
1 Terminal 30, +12 V
2 Terminal 15, switched +12 V
3 Compact alarm unit
4 Cable for deactivating acknowledgement tones
5 Status LED
6 Cable to bonnet contact switch
7 Door contact switch kit
8 Original cable to boot contact switch
9 Original cable to door contact switch
rt Red
ge Yellow
gn Green
sw Black
gr Grey
➤ Connect the black cable to earth (terminal -31).
➤ Connect the red cable to a cable with a permanent +12 V charge
(terminal +30).
➤ Connect the yellow cable to a connected positive terminal (terminal 15).
➤ Optionally, connect the green cable to the bonnet contact switch
(accessory).
➤ Optionally, connect the door contact switch kit (optional accessory) to the
green cable as shown in the circuit diagram.
➤ If you want to deactivate the acknowledgement tones when you arm or
disarm the alarm system, connect the grey cable to the black cable or
connect it to earth.
Electrical connections
33