Accessories; Proper Use; Technical Description; Function Description - Westfalia DIY-12 Bedienungsanleitung

DIY-12.book Seite 28 Dienstag, 27. März 2007 3:47 15

Proper use

3.1

Accessories

Description
Door contact switch kit
Bonnet contact switch
4 Proper use
The DIY-12 is a car alarm system. It offers additional protection against the
theft of your vehicle and its contents.
5

Technical description

5.1

Function description

The DIY-12 alarm system consists of a compact alarm unit with a shock
sensor, voltage sensor and alarm siren, as well as a status LED and two
remote control devices.
The alarm system protects vehicles and their contents from theft. When the
alarm system is armed, an alarm is triggered as soon as the ignition is
switched on, or if the shock sensor detects impacts or blows to the vehicle.
Contact switches are available as accessories for the bonnet and the doors,
so that the alarm system can be upgraded to detect them being opened.
The alarm system is designed for vehicles with an on-board 12 V power
supply.
The DIY-12 is operated with a two-button remote control. If the batteries are
flat or the remote control is lost or damaged, you can turn the alarm system
off without it.
You can program new or additional remote control devices for the alarm
system.
You can permanently deactivate the acknowledgement tones when you arm
or disarm the alarm system. To do this, the alarm system must be wired
correspondingly.
28
DIY-12
Item number
MSK-150SW
MS-650KIT