Westfalia 82 04 51 Bedienungsanleitung Seite 52

lease the trigger to close the clamp. Centre the conductor in
the clamp and hold the meter steadily during measuring.
5. Read the current value from the display.
Notes:
If "OL" is shown on the display at the manual range mode, the
selected measuring range has been exceeded by the meas-
urement value. Select a higher range.
In manual measuring range mode select the highest range
when the value to be measured is unknown.
Do not exceed the maximum input current of 600 A rms AC!
Operation
Correct Incorrect
47