Interval Programming For Hi Peak / Lo Peak Point Types - Siemens SIREC D Handbuch

Programming
g. Interval Programming for Hi Peak / Lo
Peak Point Types - When programming a High
Peak/ Low Peak Point, the Interval represents
the frequency the High or Low Peak value will
be reset to the value of the base point. The High
or Low Peak value will be logged on the
Alarm/Event Data Log before the value is reset
is the reset print is enabled. The interval time is
entered in a 24-hour clock format in Hour (00
through 24) and Minutes (00 through 59). The
longest time interval that can be entered is
24:00 which represents a reset interval of once
every 24 hours.
For the Interval Log function and Auto Resetta-
ble point types, the programmable Start Time is
not necessarily the time at which the first log /
reset will occur. However, a log / reset will al-
ways occur at the Start Time every day. The
actual first log / reset depends upon the current
time and the assigned Interval. The Recorder
calculates the first log / reset by repeatedly
adding the interval to the Start Time until the
current time is met or exceeded. See the exam-
ple below:
Current Time:
Start Time:
Timed Interval:
09:15 Programmed Start Time
10:15
11:15
12:15 Note: The Interval (1 hour) added to the
Start Time yields log/reset times
.
.
23:15
00:15
01:15
.
.
07:15 07:30 (Current Time)
08:15 Time of the first log / reset for this
example
h. Weekly Auto Reset - To reset the point once
a week use the Weekly reset option. Use the
UP (↑) or DOWN (↓) Arrow Keys to highlight
"Weekly" and press ENTER. The display will
read a day of the week, Monday - Tuesday -
Wednesday - Thursday - Friday - Saturday - or
Sunday.
4-38
07:30
09:15
1 Hour
h.1. Selecting the Week Day - Use the UP (↑)
or DOWN (↓) Arrow Keys to select the desired
day of the week and press ENTER. The display
will read "start XX:XX".
h.2. Selecting Start Time - It the Start Time
displayed is correct, press ENTER and the dis-
play returns to the "Auto reset" prompt in the
Reset Control Setup Menu. If the displayed time
is not correct, press NO and the display reads
Î Í
"str hrs XX ". Use the Numeric keypad to
enter the desired Start Hours. Up to 23 hours
may be programmed. When the correct Start
Hours are displayed press ENTER and the dis-
Î
play reads "str min XX
h.3. Use the Numeric keypad to enter the de-
sired Start Minutes. Up to 59 minutes may be
programmed. When the correct Start Minutes
are displayed, press ENTER and the display
returns to "start XX:XX". If the Start Time dis-
played is correct, press ENTER and the display
returns to the "Auto reset" prompt in the Reset
Control Setup Menu.
i. Monthly Auto Reset - To reset the point once
a month use the Monthly reset option. Use the
UP (↑) or DOWN (↓) Arrow Keys to highlight
"Monthly" and press ENTER. The display reads
Î Í
"first day XX ".
i.1. Use the Numeric keypad to enter the de-
sired day of the month on which to reset. Up to
31 may be entered in this block to represent the
number of the day in the month. When the cor-
rect day of the month number is displayed,
press ENTER and the display reads "Start
XX:XX". If the Start Time displayed is correct,
press ENTER and the display returns to the
"Auto reset" prompt in the Reset Control Setup
Menu.
i.2. Selecting Start Hours - If the displayed
Start Time is not correct, press NO and the dis-
Î
play reads "str hrs XX
keypad to enter the desired Start Hours. Up to
23 hours may be programmed here. When the
correct Start Hours is displayed, press ENTER
and the display reads "str mins
i.3. Selecting Start Minutes - Use the Numeric
keypad to enter the desired Start Minutes. Up to
59 minuets may be programmed here. When
the correct Start Minutes is displayed, press
ENTER and the display reads "str mins
If the correct Start Time is displayed, press
ENTER and the display returns to the "Auto re-
set" prompt in the Reset Control Setup Menu.
Siemens AG C79000-G7374-C211-01
Í
".
Í
". Use the Numeric
Î Í
XX ".
Î Í
XX
SIREC D Manual
".