Pick Views; Screen Dimmer - Siemens SIREC D Handbuch

Programming
1. Press the Menu Button on the Display Button
Bar. The Command Button Bar will display.
2. Press the PROGram Button on the Command
Button Bar. The Program Menu Box will display.
3. Use the Up (↑) or Down (↓) Arrow Keys to scroll
to "Displays" and press the ENTER Button. The
Displays Menu Box will display.
4. Use the Up (↑) or Down (↓) Arrow Keys, on the
Button Bar, to scroll to "Digital assign" and press
the ENTER Button.
5. The screen will show a dialog box with the cur-
rent assignment for Digital 1 as "digital 1 = pt X".
6. Use the Up (↑) or Down (↓) Arrow Keys to scroll
to the desired point to assign to digital 1 and press
the ENTER Button.
7. When the ENTER button is pushed, the Digital
Assign window, in the pop-up dialog box, will
show Digital 2 assignment. Follow steps 5 and 6
to assign points to Digitals 2 through 6. Press
ENTER after Digital 6 is assigned and the screen
will return to the "Digital assign" menu item. Press
EXIT as needed to return to the display screen
and button bar.

4.4.8 Pick Views.

option allows you to select the screen views to tog-
gle through when the view button is pressed. The
trend view and the Alarm window are always active.
To pick the screen views for use when toggling,
follow the instructions below and refer to Figure 4-6.
1. Press the Menu Button on the Display Button
Bar. The Command Button Bar will display.
2. Press the PROGram Button on the Command
Button Bar. The Program Menu Box will display.
3. Use the Up (↑) or Down (↓) Arrow Keys, on the
Button Bar, to scroll to "Displays" and press the
ENTER Button. The Displays Menu Box will dis-
play.
4. Use the Up (↑) or Down (↓) Arrow Keys to scroll
to "Pick Views" and press ENTER.
5. The screen will show the first screen view. At
each view, press YES if you want to see the cur-
rent view when toggling, or press NO if you do not
want see the current view when toggling. Once
you go through all the views, you will be returned
to the Display menu.
4-12
The Pick Views menu

4.4.9 Screen Dimmer.

mer menu option dims the backlight after a user
specified time. The screen saver time out is pro-
grammable from 0 to 720 minutes in one minute
intervals. To select the normal viewing brightness
level, the standby brightness level, and the timeout
time period, follow the instructions below and refer
to Figure 4-6.
1. Press the Menu Button on the Display Button
Bar. The Command Button Bar will display.
2. Press the PROGram Button on the Command
Button Bar. The Program Menu Box will display.
3. Use the Up (↑) or Down (↓) Arrow Keys, on the
Button Bar, to scroll to "Displays" and press the
ENTER Button. The Displays Menu Box will dis-
play.
4. Use the Up (↑) or Down (↓) Arrow Keys to scroll
to "Screen Dimmer" and press the ENTER Button.
A window will pop up prompting for the "Bright
Level".
5. Use the Up (↑) or Down (↓) Arrow Keys to raise
or lower the brightness level to the desired normal
viewing brightness level and press ENTER.
You can dim the display too much and make
it invisible. You will then have trouble finding
the Up or Down Arrow Keys to make it
brighter again.
6. A window will now pop up prompting for the
"Dim Level". Use the Up (↑) or Down (↓) Arrow
Keys to raise or lower the brightness level to the
desired standby viewing brightness level and
press ENTER.
7. A window will now pop up prompting for the
timeout "minutes". Use the numerical keypad, on
the pop-up window, to set the time period for inac-
tivity dimming. When the desired timeout is set,
press ENTER and the display will return to the
"Screen Dimmer" menu item.
The display will go to the "Bright Level" when
ACK button is flashing. If an alarm regularly
goes off within the screen dimmer time out
interval, the display will never go to the "Dim
Level".
Siemens AG C79000-G7374-C211-01
The Screen Dim-
NOTE
NOTE
SIREC D Manual