Westfalia 80 83 34 Bedienungsanleitung Seite 23

 Use smooth and even strokes. When spraying
large areas, use a criss-cross pattern as shown
on the right.
 Never start or stop the spray gun while it is
aimed at the surface to be sprayed.
 Evenly control the speed of the movement of
the spray gun. A fast movement over the
surface will give a thin coat. A slow speed
movement will give a heavy coat. Apply one
coat at a time. Make sure you observe the
manufacturer's recommended drying time before applying a further coat.
 Keep the output control at a low setting when spraying small areas. This
will avoid using too much paint and prevent overspray.
 Avoid stopping and starting when spraying an object. This can lead to too
much or not enough paint being applied.
Operation
Correct
Wrong
19
Correct Wrong