Siemens S7-300 Referenzhandbuch Seite 208

Alphabetische Liste der Operationen
Tabelle A-3 FUP-Operationen alphabetisch geordnet nach internationalen (englischen) Beschreibungen, mit
Mnemonik, Fortsetzung
Pulse Timer (Bitverknüpfungsoperation)
Reset Output
Reset_Set Flip Flop
Result Bit Equal 0
Result Bit Greater Equal 0
Result Bit Greater Than 0
Result Bit Less Equal 0
Result Bit Less Than 0
Result Bit Not Equal 0
Retentive On-Delay S5 Timer (Zeitoperation)
Retentive On-Delay Timer (Bitverknüpfungsoperation)
Return
Return Fraction Double Integer
Rotate Left Double Word
Rotate Right Double Word
Round to Double Integer
Save RLO to BR Memory
Set Output
Set Counter Value
Set_Reset Flip Flop
Shift Left Double Word
Shift Left Word
Shift Right Double Integer
Shift Right Double Word
Shift Right Integer
Shift Right Word
Subtract Double Integer
Subtract Integer
Subtract Real
Truncate Double Integer Part
TWOs Complement Double Integer
TWOs Complement Integer
Up Counter (Zähloperation)
Up Counter (Bitverknüpfungsoperation)
Up-Down Counter
(Word) And Double Word
(Word) And Word
(Word) Exclusive Or Double Word
A-12
Beschreibung Intern. Mnemonik Seite
SP 4-18
R 4-13
RS 4-33
==0 1-6
>=0 15-4
>0 15-4
<=0 15-4
<0 15-4
<>0 15-4
S_ODTS 5-11
SS 4-24
RET 16-7
MOD_DI 7-10
ROL_DW 12-11
ROR_DW 12-12
ROUND 10-14
SAVE 4-11
S 4-12
SC 4-14
SR 4-32
SHL_DW 12-4
SHL_W 12-3
SHR_DI 12-9
SHR_DW 12-6
SHR_I 12-8
SHR_W 12-5
SUB_DI 7-5
SUB_I 7-4
SUB_R 8-4
TRUNC 10-15
NEG_DI 10-12
NEG_I 10-11
S_CU 6-5
CU 4-16
S_CUD 6-3
WAND_DW 11-4
WAND_W 11-3
WXOR_DW 11-8
Funktionsplan (FUP) für S7-300/400
C79000-G7000-C566-01