Sony LMD-182MD Gebrauchsanweisung Seite 31

Location and Function of Parts and Control
Front Panel
1 8 (brightness) +/– controls
Press + for more brightness and – for less.
2 6 (contrast) +/– controls
Press + to make the contrast stronger and – to make it
weaker.
3 MENU key
Press to display the on-screen menu.
Press again to clear the menu.
4 Arrow keys (M/m/</,)
Select the menu or to make various adjustments.
5 ENTER key
Press to decide a selected item in the menu.
6 APA (Auto Pixel Alignment) key
Adjust a picture clearest automatically while a signal is
input from a computer. To adjust the picture further
for finer picture due to the input signal, see the "DOT
PHASE" on page 15.
Note
This function does not work for the video input signal.
7 INPUT key
Select the input signal. Each time you press the key,
the input signal switches as follows:
Only the monitor
Computer
When BKM-120D is installed
Computer t SDI-1 t SDI-2
When BKM-127W is installed
Computer t VIDEO-1 t VIDEO-2 t S-VIDEO
When BKM-129X is installed
Computer t RGB t COMPONENT
When BKM-128WX is installed
Computer t VIDEO t S-VIDEO t RGB t COMPONENT
Note
The audio signal cannot be changed even when the
video signal is switched.
8 - (key inhibit) indicator
When the key inhibit function works, the indicator
lights. To cancel the key inhibit function, slide the -
switch on the bottom to OFF.
9 POWER indicator
When the power is turned on, the indicator lights in
green.
This indicator lights in amber in power saving mode.
7
(GB)