Werbung
Maintenance, Cleaning and Storing
The overload valve of the floor jack is adjusted by factory to make sure that
maximum load of 2 T is not exceeded. The floor jack will not lift up heavier
load. Adjustments of this valve have to be made by hydraulic professional
services only.
Fill in oil, if only the hydraulic is lowered. Please note: Too much oil will stop
the function. Use only hydraulic oil. Never use brake fluid or other liquids.
Check the floor jack before and after each use if there is oil leakage.
All moving parts have to be lubricated regularly. Use only acid-free lubricants.
Do not store the floor jack outdoors and keep it away from moisture, cold and
heat. Lower the floor jack completely before storing it.
When using the floor jack for the first time after long storing period, first re-
move dirt and than lubricate all moving parts with an oily cloth or spray.
All manuals and user guides at all-guides.com
20
Werbung
