Werbung
Lowering the Vehicle
Make sure that no persons or obstacles are near the vehicle before lowering
it.
Open the release valve (6) slowly in order to make sure that the vehicle is
lowered slowly. Open the release valve only with the pumping handle and do
not use any tool such pliers in order not do damage the release valve.
Please note: Open the release valve by turning not more than one turn at the
utmost. If the vehicle is lowered, remove the floor jack. Press the saddle with
your foot down in order to lower the floor jack completely.
If the lifting arm (4) does lower completely, there might be air in the system.
Before using the floor jack next time, carry out bleeding process.
All manuals and user guides at all-guides.com
Using
19
Werbung
