Werbung
Before first Use
Take the trolley floor jack out of the packaging and check for any damage in
transit. Dispose off packaging materials or store it out of reach of children.
Check Oil Level resp. Fill in Oil
1. Place the floor jack on an even ground.
2. Insert the pumping handle on the release valve (6). The open end of the
pumping handle fits on the square bar of the release valve.
3. Turn the release valve (6) slowly counter clockwise. Place a cloth (cleaning
cloth) under the release valve in order to absorb leaking oil and to avoid soil-
ing the ground.
4. If the release valve is completely unscrewed, remove it. If oil drops out resp. if
the oil is up to the release valve hole, the oil filling is enough.
If not, place a cleaning cloth under the release valve and remove the cover
plate of the hydraulic cylinder (3) by using a big screwdriver with dull end. The
cover plate is fastened with four pins on the housing.
5. Carefully prise the filling plug (A) out by
using a dull screwdriver. Do not use spiky
or sharp objects in order no to damage the
filling plug (A). Fill in high-quality hydraulic
oil until the oil appears in the release valve
opening. (6). Never fill in brake fluid, motor
oil, lube oil etc.
6. Screw the release valve lightly back and insert the filling plug (A) into place.
Move the handle socket (1) with the pumping handle up and down for several
times in order to lubricate the internal mechanism of the hydraulic. Place the
cover plate of the hydraulic cylinder (2) in place. If necessary, bleed the floor
jack.
All manuals and user guides at all-guides.com
Using
17
A
6,4 mm
Werbung
