Siemens 7XV5653-0BA00 Handbuch Seite 86

Assembly and Commissioning
4.3 Commissioning
4.3 Commissioning
Fasten the device to a symmetric DIN rail as per EN 50022.
²
Check whether the operational data match the values on the name plate.
²
Do not make any changes to the device.
²
Carefully screw the fiber-optic connectors (hand-tight).
²
Insert and screw the RS232 connector in position.
²
Attach the connectors of the auxiliary voltage to the terminal V
²
Connect the the other contacts such as the binary inputs and command outputs to the terminals.
²
Switch on the auxiliary power supply.
²
After connecting the auxiliary power supply, the green LED RUN lights up and the device is ready for opera-
tion.
36
(DC: L+/L- or AC: A/N).
aux
Accessories, Binary signal transmitter 2-channel 7XV5653-0BA00, Manual
C53000-G9050-C607-2, Edition 03.2020