Operating Features - Costway TQ10152 Bedienungsanleitung

OPERATING FEATURES

Your car is fitted with 2 gearboxes containing 2 forward speeds and 2
reverse speeds.
The operating direction of your car can be controlled by the Forward \ Stop \
Back switch. When you place your foot onto the accelerator. Pushing it on
Forward it will forward. Pushing it on Stop it will stop. Pushing it on Back it
will backward.
The operating speed of your car can be controlled by the HIGH
SPEED/LOW SPEED switch. Pushing it on HIGH SPEED it will fast. Pushing
it on LOW SPEED it will slow.
The operating manual or remote control of you car can be controlled by the
Manual/ R/C switch. Pushing it on manual you can drive your car. Your car is
Remote control priority. Pushing it on Manual or R/C.You can always remote
control it.
In order to start your car, press "forward", "high speed", "manual" and place
your foot onto the accelerator.
Your ride-on car is equipped with ON/OFF switch located on dashboard.
Switch must be in the on position to activate drive. In order to start your car,
push gear lever toward into high speed position and place your foot onto the
accelerator.
To stop your car, simply release your foot from the accelerator and this will
engage the auto brake system. Your car is not fitted with a manually
operated brake.
Your car has a large turning radius. To ensure unwanted collisions with
obstacles, it is recommended that your kids drive the car in a wide open area
until he/she gets fully used to its handling and steering capabilities.
18
Thermal Fuse
Your car is fitted with a thermal overload
fuse.
The function of this component is to protect
the electrical circuit of your product. If the
product is overloaded ( refer to maximum
user's weight ) or is used on a steep incline
not recommended)the thermal fuse will cut
power supply to the motors and vehicle will
stop. Thermal fuse will reset within 2
minutes and product function will resume as
normal.
Prior to the first use of your vehicle, remove seat from vehicle and remove
insulation sleeve and connect battery wires to battery(red to red & black to
black).
Please ensure colors are correct to avoid short circuiting.
Battery charging input socket is located at the bottom of the seat. Plug
charger output socket into input socket on your car. Then plug AC adaptor
/Charger into a standard 220V household power outlet. Battery should be
charged for no longer than 15 hours for the first charge and each charge
thereafter no less than 10 hours. Never allow your battery to run out
completely. Please promptly charge if vehicle starts to show signs of slowing
down or erratic motion.
Battery charger used with the toy is to be regularly examined to avoid
damage to the cord, plug, enclosure and other parts, and in the event of
such damage it must not be used until that damage has been repaired.
Foot
Switch
19