Snap Fresh YOR-YFT01-20V Benutzerhandbuch Seite 9

• Fully charging the 4Ah battery may take up to
120 minutes.
After the battery is fully charged remove the char-
ger plug from the outlet and remove the battery
from the charger.
When the machine is not being used over a
longer period of time it is best to store the
battery in charged condition.
Assembling the tubes (Fig. B)
Always remove the battery before mounting
an accessory.
• Slide the upper tube (4) onto the motor housing
until it clicks into place.
• Slide the lower tube (5) onto the upper tube (4)
until it clicks into place.
4. OPERATION
Switching the machine on (Fig. A)
To switch on the leaf blower, press the On/Off
switch (1) to position 1 or 2. Position 1: Blowing
light materials. Position 2: Blowing heavy materials.
To switch off, push the On/Off switch 1 to the stop
in position "0".
Switching the machine off (Fig. A )
Move the On/Off switch (1) to the "0" Off position.
5. MAINTENANCE
Before cleaning and maintenance, always
switch off the machine and remove the
battery pack from the machine.
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that the
ventilation openings are free of dust and dirt. Re -
move very persistent dirt using a soft cloth moiste-
ned with soapsuds. Do not use any solvents such
as gasoline, alcohol, ammonia, etc. Chemicals such
as these will damage the synthetic components.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/
EC for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be collected
separately and disposed of in an environmentally
friendly way.
WARRANTY
SnapFresh products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact SnapFresh directly.
The following circumstances are excluded from this
guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
• Normal wear and tear;
• The tool has been abused, misused or im -
properly maintained;
• Non-original spare parts have been used.
This constitutes the sole warranty made by compa -
ny either expressed or implied. There are no other
warranties expressed or implied which extend
beyond the face hereof, herein, including the im -
plied warranties of merchantability and fitness for
a particular purpose. In no event shall SnapFresh be
liable for any incidental or consequential damages.
The dealers remedies shall be limited to repair or
replacement of nonconforming units or parts.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
EN
9