KitchenAid 5KSMFGA Bedienungsanleitung Seite 5

PRODUCT ASSEMBLY (CONTINUED)
ASSEMBLING THE ATTACHMENT
1.
Insert the Grind Screw into the Main Housing securely.
2.
Place the Blade over the end of the Grind Screw.
3.
Place the desired Grinding Plate over the Blade, matching the notch of the plate with the
tab on the bottom of the Main Housing.
4.
Place the Collar on the Main Housing, turning clockwise by hand until secured but not
tightened.
ASSEMBLING THE ATTACHMENT TO THE STAND MIXER
1.
Turn the Stand Mixer OFF (0) and unplug.
2.
For Stand Mixers with a hinged power hub cover: Flip up to open.
For Stand Mixers with a removable power hub cover: Turn the attachment knob
counterclockwise to remove power hub cover.
3.
Remove the Stand Mixer Attachment Hub cover.
4.
Insert the attachment shaft housing into the Attachment Hub.
NOTE: Removable Tray can be used as per convenience.
5.
Tighten the Stand Mixer Attachment Hub Knob until the attachment is completely secured
to the Stand Mixer.
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
A
A. Sharp Side
WARNING
Electrical Shock Hazard
5