Internal Cleaning; External Cleaning; Cleaning The Filters - AEG FSE76738P Benutzerinformation

How to start the Machine
Care programme
Before starting the Machine
Care programme, clean the
filters and spray arms.
1. Use a descaler or a cleaning product
designed specifically for
dishwashers. Follow the instructions
on the packaging. Do not put dishes
in the baskets.
2. Press and hold simultaneously
and for about 3 seconds.
The indicators and
display shows the programme duration.
3. Close the appliance door to start the
programme.
When the programme is complete, the
indicator is off.

11.2 Internal cleaning

• Clean the appliance interior with a soft
damp cloth.
• Do not use abrasive products,
abrasive cleaning pads, sharp tools,
strong chemicals, scourer or solvents.
• Wipe clean the door, including the
rubber gasket, once a week.
• To maintain the performance of your
appliance, use a cleaning product
designed specifically for dishwashers
at least once every two months.
Carefully follow the instructions on the
packaging of the product.
• For optimal cleaning results, start the
programme Machine Care.
11.3 Removal of foreign
objects
Check the filters and the sump after each
use of the dishwasher. Foreign objects
(e.g. pieces of glass, plastic, bones or
toothpicks, etc) decrease the cleaning
performance and can cause damage to
the drain pump.
CAUTION!
If unable to remove the
foreign objects, contact an
Authorised Service Centre.
1. Disassemble the filters system as
2. Remove any foreign objects
3. Reassemble the filters as instructed

11.4 External cleaning

• Clean the appliance with a moist soft
• Only use neutral detergents.
• Do not use abrasive products,

11.5 Cleaning the filters

flash. The
The filter system is made of 3 parts.
1. Turn the filter (B) counterclockwise
2. Remove the filter (C) out of filter (B).
3. Remove the flat filter (A).
instructed in this chapter.
manually.
in this chapter.
cloth.
abrasive cleaning pads or solvents.
C
B
A
and remove it.
ENGLISH 23