La Sommeliere LSBU51X1 Gebrauchsanweisung Seite 28

increase electrical consumption. Extreme cold or hot ambient temperatures may also
cause the appliances not to perform properly.
• Plug the wine cooler into an exclusive, properly installed-grounded wall outlet. Do not
under any circumstances cut or remove the third (ground) prong from the power cord.
Any questions concerning power and/or grounding should be directed toward a
certified electrician or an authorized products service center.
• To ensure proper electrical connection, follow the recommendations given in the
present manual.
• Unpack the appliance and visually check that it is not damaged. Do not connect a
damaged appliance. Inform your retailer or point of sale of any damage. In such a case,
keep the packaging.
• It is recommended that the appliance be allowed to settle for at least 24 hours before
connecting the electrical power supply, so that the compressor fluid feed is correct.
• Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation,
observe the installation recommendations provided.
• In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact
with walls or with any hot element (compressor, condenser). Observe the installation
recommendations.
• The appliance should not be placed close to radiators or cooking hot plates or gas
rings.
• Check that electrical sockets remain accessible when the appliance is installed.
• When positioning the appliance, ensure the supply cord is not trapped or damaged.
Power saving
To limit the electricity consumption of your appliance:
✓ Install it in an appropriate place (see "Installation instructions").
✓ Leave the doors open as little time as possible.
✓ To ensure that the appliance operates properly, clean the condenser regularly (see
"Maintenance").
✓ Regularly inspect the door seals and ensure that they are still closing properly. If
this is not the case, contact your after-sales service.
✓ The following combination of shelves is recommended for energy to be used as
efficiently as possible by the refrigeration unit.
27