Wireless Connection - AEG FSK76748P Benutzerinformation

16 www.aeg.com
When the latest programme selection is
disabled, the default programme is ECO.
6.10 TimeBeam
TimeBeam displays the following
information on the floor below the
appliance door:

7. WIRELESS CONNECTION

You can connect your dishwasher to the
home wireless network and then link it to
your mobile devices in My AEG Kitchen
app. This functionality allows you to
remotely control and monitor your
dishwasher.
My AEG Kitchen app is available for
download from the app store on your
mobile device. You can scan the QR
code from the rating plate to be
redirected to the app (see chapter
"Product description").
The app is compatible with iOS and
Android operating systems. Check the
compatible versions of the operating
systems in the app store.
Wi-Fi module parameters
Wi-Fi module NIUS-SA
Frequency
Protocol
Max Power
Encryption
2.412 - 2.472 GHz
IEEE 802.11 b-g-n
<20 dBm
WPA, WPA2
• The programme duration when the
programme begins.
• 0:00 and CLEAN when the
programme is completed.
• DELAY and the countdown duration
when the delay start begins.
• An alarm code when the appliance
has a malfunction.
When AirDry opens the
door, TimeBeam is off. To
check the remaining time of
the running programme, look
at the control panel display.
7.1 How to connect the
dishwasher to the network
and to the app
To connect your dishwasher, you need:
• Wireless network with the Internet
connection.
• Mobile device connected to the
wireless network.
1. Launch My AEG Kitchen app on your
mobile device and follow the
instructions in the app. When
prompted in the app, activate the
wireless connection in the
dishwasher.
2. To activate the wireless connection,
press and hold simultaneously
for 2 seconds.
• The indicator
• The display shows On for a few
seconds and then AP.
• All buttons are inactive except for
the on/off button.
3. When prompted, enter the home
network credentials in My AEG
Kitchen app.
and
flashes.