EDIFIER S360DB Bedienungsanleitung Seite 9

or
1. Press the " " button on the remote control or the volume adjustment/input selector knob on the active
satellite speaker to select Bluetooth input; indicator on the active satellite speaker is now lit.
2. Set your Bluetooth device (mobile phone, tablet etc.) to search for and select "EDIFIER S360DB".
Note:
* The Bluetooth on S360DB can only be searched for and connected using Bluetooth input. The existing Bluetooth
connection will be disconnected once the speaker is switched into other audio inputs. When switched back to
Bluetooth input, the speaker will try to connect to the last connected Bluetooth audio source device.
* Pin code for connection is "0000" if needed.
* To disconnect Bluetooth, press and hold the "
* To enjoy all Bluetooth functions please ensure your audio source device has A2DP and AVRCP profile.
* Bluetooth connectivity and compatibility may be different among different source devices, depending on the
software versions of source devices.
®
* The built-in Qualcomm aptX™ decoder in the product helps to achieve better wireless transmission sound
quality, therefore please use the device supporting Qualcomm
EDIFIER S360DB
" button on the remote control.
®
aptX™ as the audio source.
Bluetooth input
8
English