HERKULES SH7300E Original Bedienungsanleitung Seite 29

• Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refriger-
ators. There is an increased risk of electric shock if
your body is earthed or grounded.
• Keep the device away from rain and moisture. Water
entering a power tool will increase the risk of electric
shock.
• Do not use the cable for another purpose, for ex-
ample, carrying or hanging the device or pulling the
plug out of the socket. Keep the cable away from
heat, oil, sharp edges or moving device parts. Dam-
aged or coiled cables increase the risk of an electric
shock.
• If you work with an electric tool outdoors, only use
extension cables that are also permitted for outdoor
use. Using an extension cable permitted for outdoor
use reduces the risk of an electric shock.
• Connect the electric tool to the mains via a socket
outlet with a maximum fuse rating of 16A. We rec-
ommend the installation of a residual current device
with a nominal tripping current of no more than 30
mA. Seek advice from your electrical installer.
Personal safety
• The operating personnel must be at least 18 years
of age.
• Children may not work with this product.
• Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not
use the device while tired or under the influence of
drugs, alcohol or medication.
• A moment of carelessness while operating the elec-
trical device may result in serious personal injury.
• Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will re-
duce personal injuries.
• Wear hearing protection. Excessive noise can result
in a loss of hearing.
• Wear a dust protection mask. When machining wood
and other materials, harmful dust may be generated.
Do not machine material containing asbestos!
• Wear safety goggles. Sparks created during work or
fragments, chippings and dust ejected by the device
can case sight loss.
• Prevent unintentional starting. Make sure that the
switch is in the "OFF" position before inserting the
plug into the socket.
• Keeping your finger on the switch or having the de-
vice switched on when you connect it to the power
supply may result in accidents.
• Remove any adjusting key or screwdriver before
turning the device on. A tool or spanner that is lo-
cated in a rotating device part may result in injuries.
• Do not overestimate yourself. Keep proper footing
and balance at all times. This enables better control
of the device in unexpected situations.
• Dress properly. Do not wear loose clothing or jewel-
lery. Keep hair, clothing and gloves away from mov-
ing parts. Loose clothes, jewellery or long hair can
be caught in moving parts.
Careful handling and use of electric tools
• Do not overload your tool. Use the correct electric
tool for your application. The correct power tool will
do the job better and safer at the rate for which it
was designed.
• Do not use the power tool if the switch does not
turn it on and off. Any electric tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. These precautionary measures will pre-
vent the device from starting unintentionally.
• Store idle power tools out of the reach of children
and Do not let people use the device if they are not
familiar with it or if they have not read these instruc-
tions. Power tools are dangerous in the hands of
untrained users.
• Maintain your device with care. Check for misalign-
ment or binding of moving parts, breakage of parts
and any other condition that may affect the device's
operation. Have damaged parts repaired before us-
ing the device.
• Many accidents are caused by poorly maintained
power tools. Always keep your cutting tools sharp
and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are
easier to control.
• Use electric tools, insert tools, etc. according to
these instructions and as prescribed for that particu-
lar type of equipment. taking into account the work-
ing conditions and the work to be performed.
• Use of the power tool for operations different from
those intended could result in a hazardous situation.
GB | 29