Basic Settings - AEG FSE74617P Benutzerinformation

10 www.aeg.com
Programme
1h
1h 30min
2h 40min
ECO
AUTO Sense
Machine Care
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the
quantity of dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.

6. BASIC SETTINGS

You can configure the appliance by
changing basic settings according to
your needs.
Number Setting
1
2
3
4
5
6
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in
setting mode.
When the appliance is in setting mode,
the bars of the ECOMETER represent
available settings. For each setting, a
dedicated bar of the ECOMETER
flashes.
Water (l)
1) 2)
11.7
11.5
12.0
10.5
11.9
Values
Water hardness From level 1L to
level 10L (de‐
fault: 5L)
Rinse aid level From level 0A to
level 6A (de‐
fault: 4A)
End sound On
Off (default)
Auto door open On (default)
Off
Key tones On (default)
Off
Latest pro‐ On
gramme selec‐ Off (default)
tion
Energy (kWh)
9.9
Description
Adjust the level of the water softener ac‐
cording to the water hardness in your area.
Adjust the level of the rinse aid according
to the necessary dosage.
Activate or deactivate the acoustic signal
for the end of a programme.
Activate or deactivate the AirDry.
Activate or deactivate the sound of the but‐
tons when pressed.
Enable or disable the automatic selection
of the most recently used programme and
options.
The order of the basic settings presented
in the table is also the order of the
settings on the ECOMETER:
Duration (min)
0.845
1.000
1.009
0.735
0.964
0.636
1)
60
90
160
240
170
60