Geberit DuoFresh Bedienungsanleitung Seite 14

EN
3
Read the pairing secret from the
sticker inside the actuator plate and
type it in the input field in the app
when prompted.
Troubleshooting
Malfunction
The LED behind the actuator
plate is flashing red.
The device does not work at all
or partly incorrectly.
Maintenance
Replace the filter
Prerequisite
– The odour neutralisation effect has
weakened.
– The LED behind the actuator plate is
flashing red.
– Prompt in the Geberit Home app.
14
Use the Geberit Home app
The Geberit Home app communicates with
the Geberit product via a Bluetooth®
interface.
You can execute the following functions
and settings via the Geberit Home app:
• Settings
– Adjust the orientation light
– Adjust the odour extraction unit
– Reset to factory setting
• Care and maintenance
– Replace the filter
– Carry out software updates, update the
firmware
• Geberit customer service
– Contact Geberit customer service
You can access the following information
via the Geberit Home app:
• User manual
– Display the user manual
Cause
Filter spent
Device failure
Rectification
▶ Replace the filter. → See
"Replace the filter", page 14.
▶ Read the message in the
Geberit Home app.
▶ Contact a skilled person.
CAUTION
Possible health hazard
Impurities in the filter could lead
to contamination of the
breathing air.
▶ Replace the filter annually.
27021603222729099 © 03-2023
968.900.00.0(02)