Hilti NURON SI-AT-22 Original Bedienungsanleitung Seite 33

Malfunction
The message indi-
cating "Data mem-
ory almost full" is
displayed. (This
message appears
when the value is
≥ 90 %.)
The message indi-
cating "Data mem-
ory completely full"
is displayed.
10 Disposal
WARNING
Risk of injury due to incorrect disposal! Health hazards due to escaping
gases or liquids.
▶ DO NOT send batteries through the mail!
▶ Cover the terminals with a non-conductive material (such as electrical
tape) to prevent short circuiting.
▶ Dispose of your battery out of the reach of children.
▶ Dispose of the battery at your Hilti Store, or consult your local gov-
ernmental garbage disposal or public health and safety resources for
disposal instructions.
Most of the materials from which Hilti products are manufactured can
be recycled. The materials must be correctly separated before they can
be recycled. In many countries, your old tools, machines or appliances
can be returned to Hilti for recycling. Ask Hilti Service or your Hilti sales
representative for further information.
*2343812*
Possible cause
Data memory in the
torque module is almost
full. Note: When data
memory is completely
full, the oldest data will
be overwritten!
Data memory in the
torque module is com-
pletely full. Note: The
oldest data will be over-
written!
2343812
Action to be taken
▶ Connect the torque
module to a PC.
▶ Use the
AT Documentation
Software program to
export the data to a
report.
▶ Then delete the data
from the torque mod-
ule's memory to free
up storage space.
▶ Connect the torque
module to a PC.
▶ Use the
AT Documentation
Software program to
export the data to a
report.
▶ Then delete the data
from the torque mod-
ule's memory to free
up storage space.
English 29