Configuration; Time Settings; Led On / Off - Hama 00053311 Bedienungsanleitung

Note – SSID
• All WLAN devices that still have the old SSID saved
will attempt to connect directly to your router instead
of the repeater, since its SSID still matches the old
one. You must therefore familiarise all devices that
want to use the WLAN with the new SSID.
• Also be aware that some older WLAN devices may
not correctly understand SSIDs with diacritical marks
or special characters. You should therefore avoid such
characters.
The remaining settings are designed only for expert users.
We recommend retaining the default settings since these
have already been designed to ensure the fastest data
transfer rate and maximum compatibility directly from the
factory. These settings should therefore only be changed
for very special cases.
Click the Apply button to save the settings made.
If you do not, the settings will be lost. In the next window,
the settings you have made will be confirmed as having
been saved.
Note
• Be aware that you need to restart the repeater at least
once for the modified settings to be actively adopted.
You can now restart the repeater or make further settings.
• If you wish to restart the repeater, click the Apply button.
• To make further settings, click Next.
6

7.4 Configuration

In the "Configuration" menu item, you can make the
following settings:

7.4.1 Time settings

In the Time menu item, you can adjust the time zone to
your current location. By default, GMT +00.00 Greenwich
Mean Time is set. If you are operating the device in
Germany, you should set the time zone to (GMT +01.00
Amsterdam, Berlin).
Click the Apply button to save the settings made. If you
do not, the settings will be lost. In the next window,
the settings you have made will be confirmed as having
been saved.
Note
• Be aware that you need to restart the repeater at least
once for the modified settings to be actively adopted.
You can now restart the repeater or make further settings.
• If you wish to restart the repeater, Press Restart device.

7.4.2 LED On / Off

The LED On / Off option allows you to completely disable
or enable the repeater's display.
• In the "Configuration" sub-menu, select the menu item
"LED On / Off".
• Enable or disable the LED.
• Press "Restart device" or "Restart" on the following page.
Note
• Be aware that you need to restart the repeater at least
once for the modified settings to be actively adopted.
You can now restart the repeater or make further settings.
• If you wish to restart the repeater, Press Restart device.