Device Status; Log Off; Restart Device; Care And Maintenance - Hama 00053311 Bedienungsanleitung

Note
• Do not switch off or unplug either the repeater or your
PC / notebook during the update process! Doing so
will stop your WLAN repeater from functioning!
• Restart the repeater so that the update is adopted.

7.4.6 Device status

The Device status option shows you the repeater's current
settings and useful information.
Examples:
Firmware version:
Operating time:
WLAN encryption:
Connected clients:
WLAN status:

7.4.7 Log off

Clicking "Log off" allows you to log off from the repeater's
web interface.
• In the "Configuration" sub-menu, select the menu item
"Log off".

7.4.8 Restart device

Clicking "Restart device" allows you to restart the repeater.
• In the "Configuration" sub-menu, select the menu item
"Restart device".

8. Care and Maintenance

• Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
• If you do not plan to use the product for a prolonged
period, turn off the device and disconnect it from the
power supply. Store it in a clean, dry place away from
direct sunlight.
8
Displays the installed firmware
version.
Displays how long the repeater
has been operation since it was
last switched off.
Displays the WLAN encryption
system currently being used.
Displays how many devices are
connected to the repeater.
Displays whether there is a
connection to the Internet or not.

9. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.

10. Service and Support

Please contact Hama Product Consulting if you have any
questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
11. Consumption information according to directive
(EU)
No. 801/2013 amending the directive (EC)
No. 1275/2008
Status
Manual standby
(Ready state (Standby)
on devices without
information or status
indicator (manual)*)
Networked standby
mode***
*Press the Power button
***Ethernet cable connected
Please note that the actual power consumption can be
dependent on multiple factors. These include the personal
settings, the operating mode, the ambient temperature and
the firmware version of the product used. The values set out
above represent maximum values.
The actual reference values can be found at:
www.hama.com -> 00053306 -> Downloads ->
Consumption information

12. Declaration of Conformity

Hereby, Hama GmbH & Co KG declares that the
radio equipment type [00053306] is in compliance
with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following
internet address:
www.hama.com -> 00053306 -> Downloads.
Frequency band(s)
Maximum radio-
frequency power
transmitted
Power
Duration of
consumption
trigger time
(Watt)
– 0.1 W
≤ 20 min ≤ 1.8 W
2412 MHz – 2472 MHz
2.4 GHz / 100 mW (EIRP)