Cleaning - Starter Spectar Rgb Led Ring 3.2 Kit Gebrauchsanleitung

appliance plug out of the power supply unit (12).
3. Pull the plug of the power supply unit (12) out of the socket (18) on the
back of the luminaire.
or
4. Press the release (19a) of each battery and pull it straight away from the
lamp, backwards out of the battery dock (19).
5. Let the luminaire cool down completely.
6. Clean the luminaire if necessary (see chapter 9).
7. Open the fixing screw of the holder (4) and lift the luminaire off the
tripod.
8. Store the luminaire and the accessories in the transport bag and,
if necessary, in the article packaging.
NOTE - Always store the luminaire in a dry and dust-free place.
9.

Cleaning

NOTE - Only clean the components as indicated in the table below.
Never allow the luminaire or the power supply unit to come into contact
with moisture or water.
Component
Housing, tripod, brackets,
ball head
NOTE - Do not use any cleaning agents or solvents! Make sure that no
moisture enters the housing!
42
Cleaning
1. Remove dirt with a dry or damp soft
cloth (non-fluffy, e.g. microfibre cloth).´
2. Allow parts to dry completely.