Set Colour Temperature; 3200-7500K) On The Luminaire; Setting The Light Effects ( 01-09) On The Lamp; End Luminaire Setting Or Light Effect - Starter Spectar Rgb Led Ring 3.2 Kit Gebrauchsanleitung

7.11 Set colour temperature (

1. Switch on the luminaire as described in the chapter 6.
2. Press the function knob (7) until the colour temperature
the bottom line of the display and release the knob.
3. Turn the function knob (7) to the right or left until the colour
temperature corresponds to your idea.
→ The corresponding colour temperature in K is shown in the bottom
line of the display (27).

7.12 Setting the light effects ( 01-09) on the lamp

1. Switch on the luminaire as described in the chapter 6.
2. Press the function knob (7) until the light effect symbol
top line of the display and release the knob.
3. Turn the function knob (7) to the right or left until the desired
light effect (23) is achieved.
→ The luminaire has the effects 01 thunderstorm, 02 lightning storm,
03 TV, 04 slow RGB colour change, 05 fast RGB colour change,
06 candlelight, 07 police car (red-blue), 08 ambulance (white-blue),
09 fire engine (white-red).

7.13 End luminaire setting or light effect

To end the current luminaire setting or the selected lighting effect,
briefly press the function rotary knob (7).

7.14 Controlling the luminaire via Bluetooth and app

You can find out how to control the luminaire via Bluetooth and the
Instarter Spectar LED app in the self-explanatory app.
8.

Transporting or storing the luminaire

1. Switch off the luminaire. To do this, move the on/off switch (20) to the
position [0].
2. Pull the mains plug of the mains cable (9) out of the socket and the

3200-7500K) on the luminaire

EN
is shown in
is shown in the
41