Amewi AFX4 R3D Bedienungsanleitung Seite 15

1. Switch on the remote control and place it near the helicopter.
2. Connect the battery to the helicopter.
3. The indicator lights on the helicopter and on the remote control will flash. Push the throttle up and down once. The remote-
control beeps, the LEDs on the helicopter and remote-control light up and the connection is established.
4. Pull both levers outwards and downwards to start the helicopter. Alternatively, press the auto-start button to let the helicopter
take off directly.
5. Keep the nose of the helicopter pointed forward and fly with enough distance to yourself and others.
6. To land, pull the throttle down and hold it there for two to three seconds. Release it as soon as the rotor has stopped spinning.
Alternatively, you can press the auto-landing button.
HINWEIS: Anfänger sollten die Flugrichtung beachten. Halten Sie die Nase nach vorne gerichtet, um Verletzungen zu vermeiden.
NOTE: Beginner should pay attention to the direction of flight. Keep the head forward to avoid causing injury.
3D ROLL MODE
3D ROLL MODUS /
Um in den 3D-Rollmodus zu gelangen, muss der Hubschrauber auf eine Höhe von mehr als 3 Metern gebracht werden. Zu diesem
Zeitpunkt blinkt die Hubschrauber-Kontrollleuchte mehrere Male schnell, um die 3D-Roll-Aktion durchzuführen.
To enter the 3D roll mode, the helicopter must be brought to a height of more than 3 metres. At this time, the helicopter indicator
light flashes rapidly several times to perform the 3D roll action.
Vorwärtsflug
Forward flight
Höher als 3 Meter
More than 3m
amewi.com
BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL AFX4 R3D
Halten Sie einen Sicherheitsabstand von mind. 2 Meter
Keep a safe distance of more than 2 meters
Schritt 2
Step 2
15