Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning; Maintenance; Maintenance Plan - Zipper Maschinen ZI-EWB260 Betriebsanleitung

Elektrische schubkarre
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

14 CLEANING, MAINTENANCE, STORAGE, DISPOSAL
14.1

Cleaning

The usage of certain solutions containing ingredients damaging metal surfaces as well
as the use of scrubbing agents will damage the machine surface!
Clean the machine surface with a wet cloth soaked in a mild solution
Never use running water or a high pressure cleaner to clean the machine.
• Clean the outer parts with a damp sponge.
• Never clean the electronic parts with water!
• Check the machine and remove the deposits and / or residues with a brush.
14.2

Maintenance

Unplug battery before all maintenance and settings!
Serious injury due to unintentional or automatic activation of the machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be serviced
by trained persons only.
Clean your machine regularly after every usage – it prolongs the machines lifespan and is
a pre-requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
Store the machine in a closed, dry location.
14.2.1

Maintenance plan

After each workshift:
• Check the cables (tight fit, damage)
After one year:
• Exchange of gear-box oil
ZIPPER MASCHINEN GmbH
www.zipper-maschinen.at
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
C AU TI O N
Gear-box oils are toxic and must not be released into the environment!
Follow the manufacturer's instructions and contact your local authorities for
information on proper disposal.
Loosen and unscrew the oil inlet/outlet screw (1).
(in position machine tipped up).
Allow old gear oil to drain into a collecting container.
(To do this, return the machine to the "normal position", the
oil drain plug is then in the lowest position.
Tip the machine back up and fill with new gear oil (type:
GL4 (SAE80), 100 ml. Insert the oil inlet/outlet screw (1) and
tighten it again.
N O TI C E
N O TI C E
NOTICE
22
ZI-EWB260

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

10675561

Inhaltsverzeichnis