GE UltraView LCD 17 in Benutzerhandbuch Seite 5

UltraView LCD 17 in./19 in. Monitor
Unplug the unit from the main AC power source and refer servicing to qualified
service personnel under the following conditions:
• When the power-supply cord or plug is damaged.
• If liquid has been spilled or an object has fallen into the unit.
• If the unit has been exposed to rain or moisture.
• If the unit does not operate normally.
• If the unit has been dropped.
8. Lightning: For added protection during a lighting storm or when this unit is left
unattended and unused for long periods of time, unplug the unit from the wall
outlet and disconnect the cable system. This will prevent damage to the unit due
to lightning and power line surges.
9. Mains plug (2 pin/3 pin):
1. Do not remove the grounding or earth connection from the power supply /
mains plug.
2. Always remember to unplug the LCD monitor from the power supply under the
following circumstances:
• If the monitor will not be used for a long period of time.
• If the power supply cable or plug / connector is damaged.
• Please refer to the user manual when connecting and disconnecting the LCD
monitor from any power supply or other systems and before making any
adjustments to the monitor. In the event of any unexpected situation
occurring whilst operating the monitor, please switch off the power supply
and remove the power cable. If the problem is not explained in the user
manual, please contact your local supplier.
• If the monitor housing is damaged or broken.
CAUTION: Do not attempt to dismantle this product. Any attempt to dismantle or
remove the covers from this product will invalidate the warranty and may also result
in serious injury.
5 • EN