Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WARNING
It is very important that this instruction manual is kept with the equipment
for future reference. These warnings are provided for safety reasons as
well as for good product conservation. They must be read carefully before
use. Sistematica S.r.l. declines any responsibility deriving from the non-
observance of the warnings reported in this manual.
• Never try to repair the equipment yourself. Repairs carried out by
inexperienced people can cause serious damage or malfunctions.
Contact the nearest authorized service centre.
• For correct operation, use only original spare parts.
• Connect the system only to a power source that conforms to the
specifications described in this manual.
• Before carrying out mechanical/electrical work on the vehicle, disconnect
the power source.
• Do not travel with the system turned on (if it's not necessary for the
operativity of the application).
• Respect all warnings and safety regulations when using the device in
restricted areas.
• Turn off the device in potentially explosive environments.
• Always respect the rules, instructions and indications in potentially
explosive environments.
Sistematica S.r.l. reserves the right to make, at any time and without notice,
modifications and improvements to the products to increase the quality, and
without such modifications being reported in this publication.
COPYRIGHT
No part of this manual can be reproduced or stored in a mass storage
system or transmitted to third parties in any form or by any means, without
Sistematica S.r.l. having issued prior written authorization.
ABBREVIATIONS & SYMBOLS
MO = MASTER OUTPUT
Additional function combined with all outputs (to control, for example,
the general solenoid valve or the hydraulic pump simultaneously with the
activity deriving from the selected key).
EO = EMERGENCY EXIT
Command that is activated when the system is turned on using the START
button and is deactivated by pressing the STOP button or 2 minutes after
the last activity on the handheld device (TimeOut).
M = MAINTAINED FUNCTION
The receiver output(s) remain active as long as the key is held down.
L = LATCHED (OR ON / OFF) FUNCTION.
When the button is released, the corresponding output(s) on the receiver
remain(s) activated and be deactivated the next time you press the same
button.
= NOTES, WARNINGS, SIGNS
73
Werbung
Inhaltsverzeichnis
