Switching On/Off - Velleman BTSP6 Bedienungsanleitung

•
Do not drop, crush, bend or apply excessive force to the speaker.
•
Do not operate the speaker in places with frequent static electricity or
electrical noise, e.g. near a speaker or TV set.
•
This speaker contains magnets. Keep it away from sensitive objects
such as credit cards and video screens to avoid damage or malfunction.
•
Leaving the speaker in hot or cold places – such as a car parked outside
in summer or winter – will reduce the capacity and lifetime of the
battery. Keep the speaker between 15 °C and 25 °C.
•
Do not switch the device on immediately after it has been exposed to
changes in temperature. Protect the device against damage by leaving
it switched off until it has reached room temperature.
•
Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
1 LED lens
2 speaker
3 housing
4 AUX connector
5 micro USB connector
6 LED indicator
5. Operation
5.1 Charging
The device needs to be charged before using. To do so, connect the device
to a powered USB slot. The red LED indicator will turn off when the device is
fully charged. Disconnect from the power source.
Note
We recommend switching off the device while charging.

5.2 Switching On/Off

Switch on by pressing and holding the on-off button. Switch off after use.
V. 02 – 05/09/2016
BTSP6
7 microSD card slot
8 back/volume –
9 LED on-off
10 play/pause/mode
11 forward/volume +
12 on-off
4 ©Velleman nv