Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
34/58
Bosch Rexroth AG
To this Documentation
1.3
Display of information
In order to enable you to work with your product in a fast and safe way, uniform
Safety instructions, symbols, terms and abbreviations are used. For a better
understanding they are explained in the following sections.
1.3.1
Safety instructions
The Safety instructions please look in Tab. 1: Required and supplementary
documentation Rexroth PSI6xxx Medium-Frequency Inverter Instructions and
Rexroth Weld Timer Safety and user information.
1.3.2
Symbols
The following symbols mark notes that are not safety-relevant but increase the
understanding of the documentation.
Tab.2: Meaning of the Symbols
Symbol
Meaning
If this information is disregarded, the product cannot be
used and or operated to the optimum extent.
Single, independent step
1.
Numbered step:
2.
The numbers specify that the Steps are completed one
after the other.
3.
1.3.3
Designations
This documentation uses the following designations :
Tab.3: Designation
Designation
Meaning
BOS 6000
Bedienoberfläche Schweißen (Welding Software)
PSG xxxx
Medium-Frequency Welding Transformer 1000Hz
PHA
Phase angle
General abbreviation for heat.
%I
May be specified in %I (scale values) or kA Scale values (%I)
Constant-current regulation.
KSR
Pre-weld time
PreWLD
Main-weld time
MainWLD
Psot-weld time
PstWLD
PSF
Prozess stability
XQR
UI control module
STC TEACH
Sheet Thickness Combination, teaching
R911336190 | PSI 6xCx.760.xx
Werbung
Inhaltsverzeichnis
