Adjusting The Position Of The Brakes - O2Feel Equo Benutzerhandbuch

For stems with 4 screws, you must always unscrew
and screw in a cross pattern:
1
3
2.1.4 Adjusting the position of
the brakes
To make sure the brake lever is in the correct
position, unscrew the brake clamp and adjust
the angle so that it points in the same direction
as your forearms when you are in the cycling
position.
Adjust the position so that you can apply the
brakes with two fi ngers.
4
Tighten the screws again to 5Nm. If you want to
make any other adjustments, contact your reseller.
2
35