ATOMSTACK R30 Installationshandbuch Seite 16

Material
Plastic
Leather
Acrylic
Rubber
Oil
painting paper
Rock
Remark：
1.The parameter table is only for the most widely used materials. Customers may need to try other uncommon
materials by themselves, or they can contact us to apply for testing.
2.PVector files line mode parameters：
Copper：Speed 500mm/m，acceleration 200,Natural color alumina：Speed 600mm/m，acceleration 200
Other materials：Speed 1000mm/m，acceleration 200
3.For engraving non-vector format files, please refer to the above parameter table.
Speed
Quality
（mm / min）
0.01 3000
0.01 4000
0.01 6000
0.01 1000
0.02 2000
0.01 1000
Engraving
Max-Power Image Mode
80% Threshold
100% Threshold
100% Threshold
100% Threshold
100% Threshold
100%
14
Needs to
be blackened
NO
NO
NO
NO
NO
Filled NO