Retevis RT649B Bedienungsanleitung Seite 15

you to exceed RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an
antenna specifically authorized by the manufacturer for use with this radio, and the antenna gain shall not exceed the
specified gain by the manufacturer declared.
• DO NOT transmit for more than 50% of total radio use time, more than 50% of the time can cause RF exposure
compliance requirements to be exceeded.
• During transmissions, your radio generates RF energy that can possibly cause interference with other devices or
systems. To avoid such interference, turn off the radio in areas where signs are posted to do so.
• DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft,
and blasting sites.
• Portable Device, this transmitter may operate with the antenna(s) documented in this filing in Push-to-Talk and
body-worn configurations. RF exposure compliance is limited to the specific belt-clip and accessory configurations as
documented in this filing and the separation distance between user and the device or its antenna shall be at least
2.5 cm.
• Mobile Device, during operation, the separation distance between user and the antenna subjects to actual regulations,
this separation distance will ensure that there is sufficient distance from a properly installed externally-mounted
antenna to satisfy the RF exposure requirements.
• Occupational/Controlled Radio, this radio is designed for and classified as "Occupational/Controlled Use Only",
meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to
minimize such hazards; NOT intended for use in a General population/uncontrolled environment.
• General population/uncontrolled Radio, this radio is designed for and classified as "General population/uncontrolled
Use".
RF Exposure Compliance and Control Guidelines and Operating Instructions
To control your exposure and ensure compliance with the occupational/controlled environment exposure limits, always
adhere to the following procedures.
Guidelines:
• User awareness instructions should accompany the device when transferred to other users.
• Do not use this device if the operational requirements described herein are not met.
Operating Instructions:
• Transmit no more than the rated duty factor of 50% of the time. To Transmit (Talk), push the Push to Talk (PTT)
button. To receive calls (listen), release the PTT button. Transmitting 50% of the time, or less, is important because
14