Inhaltsverzeichnis
Werbung
10-570
2. Controlling a contact
Various actions can be performed using CONTROL AND LIGHT. For exam-
ple, a contact can control a gate or the outside lighting or the lighting in
EN
the entrance hall.
Ask your installer if these options have been installed.
3. Setting automatic functions
You can set various AUTOMATIC FUNCTIONS:
FLOOR DOOR OPEN: After a floor call (for example from an apartment
door), the floor door can be opened if
after the call was made.
CALL DIVERT: If this function is active, the call will be diverted to another
internal unit. The green LED lights up if this function is activated.
DOORMATIC: If this function is active, the door will automatically open when there is a call (ring-and-come-in func-
tion). This option can be used in home practices of offices with free access. The green LED lights up if this function
is activated.
The functions above are only possible if they are installed by an installer.
4. Changing the settings
Both the user and the installer can change certain settings.
However, the installer's settings menu is secured to safeguard the techni-
cal operation of the installation.
4.1: Changing the settings for the user
Use r
Key T o ne :
Rin g V ol :
Bri gh t :
Con tr a st :
Col or :
Ba ck
22
User manual internal video unit
is pressed within 30 seconds
D is a b le
Up
Do w n
O K
Control and Light
1 Contact 1
2 Contact 2
3 Contact 3
4 Licht Contact
Back
Automat Functions
Floor Door Open: Disable
Call Divert:
Doormatic:
Back
Intercom Setting
1 User
2 Installer
Back
The beep sound that occurs when the keys on the internal unit
are touched can be switched on or off here.
Both the ring volume and the image settings can be changed.
Up
Down
OK
Disable
Disable
Up
Down
OK
Up
Down
OK
.
.
Werbung
Inhaltsverzeichnis
