Cleaning And Maintenance - Merax FS-C-17 Benutzerhandbuch

Cleaning and maintenance

• Before cleaning the appliance, make sure that the appliance is switched off and
the plug is disconnected. Allow the unit to cool down.
• Clean the device with a slightly damp cloth only. Never use brushes, aggressive
cleaning agents, petrol, thinners or alcohol. Rub the seat dry with a clean dry
cloth.
• Never immerse the appliance in water to clean it and ensure water cannot get
into the appliance.
• Wait un�l the device is completely dry before using it again.
• Be careful when rolling up the power cord so you don't damage it.
• It is best to store the device in its original packaging and keep it in a clean, dry
place.
Troubleshoo�ng
Device cannot be started
•
Check plug (power connec�on) and if power switch is switched on.
Remote controller does not work
•
Replace ba�eries (2 x AAA ba�eries are necessary) and check, if the distance
between remote controller and device is less than 2.5 meters.
Sudden stop
•
Default working �me of 10 minutes is over. Please re-start the device a�er a
pause of at least 10 minutes.
Display "ER01" or "ER02" or showing abnormal behavior
•
Disconnect the power supply, wait for 2 minutes and re-start the device.
If the problem cannot be solved with above hints, contact the customer service.
Technical specifica�ons
Max. user weight: 120 kg
Frequency: 50-60 Hz
Rated power: 200 W + 200 W = 400 W
Integrated speaker: 3 W
Oscilla�on amplitude: 11mm
Oscilla�on frequency: 7-12 Hz
Linear amplitude: 8mm
Linear frequency: 6-9 Hz
20