Noise Information; Environmental Protection; Vibration Information; Declaration Of Conformity - Kress KG285 Bedienungsanleitung

SUGGESTED BATTERIES
AND CHARGERS
Category
20V Battery
20V Charger
We recommend that you purchase your accessories
listed in the above list from the same store that sold
you the tool. Refer to the accessory packaging for
further details. Store personnel can assist you and
offer advice.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
Wear ear protection

VIBRATION INFORMATION

Vibration total values (triax vector sum)
determined according to EN 62841:
Vibration emission value: a
Uncertainty K = 1.5 m/s²
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may
be used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration and noise
emissions during actual use of the power
tool can differ from the declared value depending
on the ways in which the tool is used especially
what kind of workpiece is processed dependant on
the following examples and other variations on how
the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
Type Capacity
KAB02 2.0 Ah
KAC04 4.0 A
L = 84.65 dB(A)
pA
K = 3 dB(A)
pA
L = 95.65 dB(A)
wA
K = 3 dB(A)
wA
= 2.39 m/s²
h
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the
operating cycle such as the times when the tool is
switched off and when it is running idle but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.
Helping to minimise your vibration and noise
exposure risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high
vibration tool use across a number of days.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
On behalf of Positec declare that the product
Description Kress Cordless Hedge Trimmer
Type KG285 KG285.X (250-299- designation of
machinery, representative of cordless hedge
trimmer)
Function Trimming hedges and brushes
Complies with the following directives,
2006/42/EC
2014/30/EU
2011/65/EU&(EU)2015/863
2000/14/EC amended by 2005/88/EC
2000/14/EC amended by 2005/88/EC:
- Conformity assessment procedure as per Annex V
- Measured sound power level
- Declared guaranteed sound power level 96 dB(A)
Standards conform to,
EN 62841-1
EN 62841-4-2
EN ISO 3744
EN 55014-1
EN 55014-2
The person authorized to compile the technical file,
EN
95.65 dB (A )
11