PIEPS PRO BT Bedienungsanleitung Seite 14

COARSE SEARCH (5B)
As soon as a signal is received, follow the direction indication quickly and see if the distance
reading goes down. If the distance reading increases, change your direction by 180°.
• (5B1) go left
• (5B2) go straight ahead
• (5B3) go right
FINE SEARCH (5C)
The direction arrow disappears at a distance reading of 2 m. Look for the point of the lowest
distance reading. Work slowly and on the surface of the snow.
PINPOINTING (5D)
Check the search result by systematic probing. On a hit, leave the probe stuck.
MULTIPLE BURIAL (5E)
A multiple burial is indicated clearly on the display by the number of small human figures (2G, 2H).
Marking is possible from a distance reading of 5 m and is indicated by the MARK symbol (2E).
Press the MARK button (1D) briefly to "hide" the localized transmitter. A successful flagging is
confirmed by a frame around the human figure (2J). The display then indicates the direction/
distance to the next strongest signal inside the receiving range.
GROUP CHECK
Despite a comprehensive self-check, a beacon check (transmit check and receive check) is
obligatory prior to every tour! The PIEPS PRO BT/POWDER BT provides the group check func-
tion. In group check mode the receiving range is limited to 1 m.
Group check regular
PIEPS PRO BT/POWDER BT
Check: frequency
Start Press and hold the button MARK
(1D) during the group check count-
down (CH)
End
The PIEPS PRO BT additionally provides a pro-mode. The pro-mode allows a transmit check as
well as a receive check without exiting the group check mode. By default, it is disabled and can
be enabled in the PIEPS APP device manager.
14
Group check extended
PIEPS PRO BT only
Check: frequency/pulse/period
Press and hold the button SCAN (1E)
during the group check countdown (CH)
Release button