12 x 3,5-Zoll-SAS/SATA-Expander-Rückwandplatine
Dieser Abschnitt enthält Informationen zur Kabelführung für das Servermodell mit einer vorderen Expander-
Rückwandplatine für 12 x 3,5-Zoll-SAS/SATA-Laufwerke.
Informationen zum Anschließen der Netzkabel für die vordere(n) Rückwandplatine(n) finden Sie unter
„Rückwandplatinen: Servermodelle mit 3,5-Zoll-Laufwerkpositionen an der Vorderseite" auf Seite
Zum Anschließen von Signalkabeln an die Rückwandplatine(n) beachten Sie je nach Serverkonfiguration die
folgenden Kabelführungsszenarien.
•
„Vordere Rückwandplatine: 12 x 3,5-Zoll-SAS/SATA-Expander" auf Seite 386
•
„Vordere + hintere Rückwandplatinen: 12 x 3,5-Zoll-SAS/SATA-Expander + 2 x 3,5-Zoll-SAS/SATA" auf
Seite 387
•
„Vordere + hintere Rückwandplatinen: 12 x 3,5-Zoll-SAS/SATA-Expander + 4 x 2,5-Zoll-AnyBay" auf
Seite 388
•
„Vordere + hintere Rückwandplatinen: 12 x 3,5-Zoll-SAS/SATA-Expander + 4 x 3,5-Zoll-SAS/SATA" auf
Seite 389
•
„Vordere + mittlere + hintere Rückwandplatinen: 12 x 3,5-Zoll-SAS/SATA-Expander + 4 x 3,5-Zoll-SAS/
SATA + 4 x 3,5-Zoll-SAS/SATA" auf Seite 390
Vordere Rückwandplatine: 12 x 3,5-Zoll-SAS/SATA-Expander
Dieser Abschnitt enthält Informationen zur Kabelführung für die Konfiguration (eine vordere Expander-
Rückwandplatine für 12 x 3,5-Zoll-SAS/SATA-Laufwerke) mit einem 8i RAID/HBA-Adapter.
8i RAID/HBA-Adapter
Verbindungen zwischen Anschlüssen:
386
ThinkSystem SR655 V3 Benutzerhandbuch
↔
↔
↔
,
,
, ...
1
1
2
2
3
3
↔
n
n
359.