Drei 8 x SAS/SATA-Rückwandplatinen
Dieser Abschnitt enthält Informationen zur Kabelführung für das Servermodell mit drei vorderen 8 x 2,5-Zoll-
SAS/SATA-Rückwandplatinen für Laufwerke.
Informationen zum Anschließen der Netzkabel für die vordere(n) Rückwandplatine(n) finden Sie unter
„Rückwandplatinen: Servermodelle mit 2,5-Zoll-Laufwerkpositionen an der Vorderseite" auf Seite
Zum Anschließen von Signalkabeln an die Rückwandplatine(n) beachten Sie je nach Serverkonfiguration die
folgenden Kabelführungsszenarien.
•
„Vordere Rückwandplatinen: drei 8 x SAS/SATA" auf Seite 325
•
„Vordere + hintere Rückwandplatinen: drei 8 x SAS/SATA + eine 4 x 2,5-Zoll-SAS/SATA" auf Seite 328
•
„Vordere + hintere Rückwandplatinen: drei 8 x SAS/SATA + eine 4 x 2,5-Zoll-AnyBay" auf Seite 331
•
„Vordere + hintere Rückwandplatinen: drei 8 x SAS/SATA + eine 8 x 2,5-Zoll-SAS/SATA" auf Seite 335
•
„Vordere + mittlere Rückwandplatinen: drei 8 x SAS/SATA + eine 4 x 2,5-Zoll-SAS/SATA" auf Seite 339
•
„Vordere + mittlere Rückwandplatinen: drei 8 x SAS/SATA + zwei 4 x 2,5-Zoll-SAS/SATA" auf Seite 341
•
„Vordere + mittlere + hintere Rückwandplatinen: drei 8 x SAS/SATA + zwei 4 x 2,5-Zoll-SAS/SATA + eine
4 x 2,5-Zoll-SAS/SATA" auf Seite 343
•
„Vordere + mittlere + hintere Rückwandplatinen: drei 8 x SAS/SATA + zwei 4 x 2,5-Zoll-SAS/SATA + eine
8 x 2,5-Zoll-SAS/SATA" auf Seite 345
Vordere Rückwandplatinen: drei 8 x SAS/SATA
Dieser Abschnitt enthält Informationen zur Kabelführung für das Servermodell mit drei vorderen 8 x 2,5-Zoll-
SAS/SATA-Rückwandplatinen für Laufwerke.
•
„32i RAID/HBA-Adapter" auf Seite 325
•
„16i und 8i RAID/HBA-Adapter" auf Seite 326
•
„Drei 8i RAID/HBA-Adapter" auf Seite 327
32i RAID/HBA-Adapter
Dieser Abschnitt enthält Informationen zur Kabelführung für die Konfiguration (drei vordere
Rückwandplatinen für 8 x 2,5-Zoll-SAS/SATA-Laufwerke) mit einem 32i RAID/HBA-Adapter.
32i RAID/HBA-Adapter
Verbindungen zwischen Anschlüssen:
↔
↔
↔
,
,
, ...
1
1
2
2
3
3
↔
n
n
.
Kapitel 6
Interne Kabelführung
290.
325