Vordere + mittlere + hintere Rückwandplatinen: drei 8 x SAS/SATA + zwei 4 x
2,5-Zoll-SAS/SATA + eine 4 x 2,5-Zoll-SAS/SATA
Dieser Abschnitt enthält Informationen zur Kabelführung für das Servermodell mit drei vorderen
Rückwandplatinen für 8 x 2,5-Zoll-SAS/SATA-Laufwerke, zwei mittleren Rückwandplatinen für 4 x 2,5-Zoll-
SAS/SATA-Laufwerke und einer hinteren Rückwandplatine für 4 x 2,5-Zoll-SAS/SATA-Laufwerke.
•
„32i und 8i RAID/HBA-Adapter" auf Seite 343
•
„CFF 8i/16i RAID/HBA-Adapter + CFF Expander" auf Seite 344
•
„8i/16i RAID/HBA-Adapter + CFF Expander" auf Seite 344
32i und 8i RAID/HBA-Adapter
Dieser Abschnitt enthält Informationen zur Kabelführung für die Konfiguration (drei vordere
Rückwandplatinen für 8 x 2,5-Zoll-SAS/SATA-Laufwerke, zwei mittlere Rückwandplatinen für 4 x 2,5-Zoll-
SAS/SATA-Laufwerke und eine hintere Rückwandplatine für 4 x 2,5-Zoll-SAS/SATA-Laufwerke) mit einem
32i RAID/HBA-Adapter und einem 8i RAID/HBA-Adapter.
32i und 8i RAID/HBA-Adapter
Verbindungen zwischen Anschlüssen:
Abbildung 305. Signalkabelführung
Von
BP 1: SAS
1
BP 2: SAS
2
BP 3: SAS
3
Hintere Rückwandplatine: SAS
4
Mittlere Rückwandplatinen: SAS
5
↔
↔
↔
,
,
, ...
1
1
2
2
3
3
Zu
32i Adapter: C0
1
32i Adapter: C1
2
32i Adapter: C2
3
32i Adapter: C3
4
8i Adapter: C0
5
↔
n
n
.
Kapitel 6
Interne Kabelführung
343