Villager
MBC 33 E (GB)
Working position:
Hold the control handle with your right hand, and the shaft with your left hand, Your left arm should be
extended to the most comfortable position.
NOTE:
Take a rest when you feel fatigue
Applications
Preparations
Use lopping shears to cut out thick branches first.
Cutting sequence
If a radial cut is necessary, cut a little at a time in several passes.
Cutting techniques
Vertical cut:
Swing the cutting blade up and down in an arc as you move along the hedge use both sides of the
cutting blade.
Horizontal cut:
ο
ο
Hold the cutting blade at an angle of 0
to 90
as you swing the hedge trimmer horizontally.
Swing the blade in an arc towards the outside of the tedge so that the cuttings are swept on to the
ground.
24