Hedge Trimmer - Villager MBC 33 E Gebrauchsanweisungen

Villager MBC 33 E (GB)
Working techniques Relieving cut:
To avoid tearing the bark, kickback or first perform undercut and pinching the bar when pruning thick
cross-cut at a distance (A)of about branches, always star by performing 25cm (10")from the final cut.
Then a relieving cut (1) on the underside of the branch.
To do this apply the cutting attachment and pull it across the bottom of the branch as far as the bar nose.
Perform the cross-cut (2)
Flush-cutting thick branches
If branch diameter is more than 10 cm (4), first perform undercut (3) and cross-cut at a distance (A) of
about 25cm (10) from the final cut. Then carry out the flush-cut (4), starting with a relieving cut and
finishing with a cross-cut

HEDGE TRIMMER

WARNING!
■Never transport the articulated hedge trimmer of set it down with the engine running. An engine that's
running could be accidently accelerated causing the blades to oscillate.
■Make sure the blade cover is in place when transporting and storing the articulated hedge trimmer.
■When carrying an articulating hedge attachment must be in the transport position.
CAUTION!
■Always maintain the articulated hedge trimmer according to this owner's manual and follow the
recommended scheduled maintenance.
21