Overview Of Video Cables; Video Cable For Video Module And Control Teletext Module, Monochrome - HEIDENHAIN BC 110BF Betriebsanleitung

Overview of video cables | Video cable for video module and control teletext module, monochrome
16

Overview of video cables

16.1 Video cable for video module and control teletext module,
monochrome
Monochrome operation is possible with:
Video module
Contr. telet. module
For monochrome operation you need the adapter cable ID 510195-01 (length 1 m),
or you can prepare this cable according to the drawing below.
For your new cable please use a well-shielded 6-pin computer cable.
Cable type:
Length:
"Free" pins must not be assigned
With some controls, the shield must additionally be connected to
the ground bar of the control; see commissioning instructions of the
control
The signal ground (Sig. GND) must not be connected to the shield
Only use shielded connector housings
Your cable should only be as long as necessary, with a little allowance
for mounting and dismounting the monitor
HEIDENHAIN | User's Manual TFT-Monitor 12,1" | 06/2022
4022 226 3721
4022 226 3431, 4022 226 3432 and 4022 226 3433
3 x 2 x 0.14 mm²
max. 25 m
67