Display Settings - HEIDENHAIN BC 110BF Betriebsanleitung

Operation | Display settings
14.3

Display settings

Hot keys
For optimum image adjustment, it is sufficient in most cases to call the "Autoadjust"
function and adjust brightness and contrast as required. For this purpose, the Select
and – keys are assigned hot-key functions so that these functions can be accessed
directly.
To start automatic image adjustment:
Press the – (autoadjust) key
The image flickers slightly for a few seconds, the optimum image setting is
determined and permanently saved
To set brightness and contrast:
Press the Select (brightness contrast) key
The OSD brightness control is displayed
Press the + or – key until you reach the desired value
Press the Select (brightness contrast) key
The OSD contrast control is displayed
Press the + or – key until you reach the desired value
Wait for several seconds
The OSD menu disappears, the values for brightness and contrast are
permanently saved
OSD menu
The on-screen display (OSD) offers a pop-up menu where the end user can adjust
further display parameters if necessary or desired.
If no key is pressed for a few seconds while the OSD menu is shown, or if the Menu
key is pressed again, the current values are saved and the OSD menu disappears.
Navigation through the menus
Proceed as follows to make a setting in the OSD menu:
Press the Menu key to call the OSD menu
Press the + or – key until you reach the desired menu level
Press the Select key until you reach the item
Press the + or – key until the desired value is set
Press the Menu key to return to the submenu
Make further settings as required
OR
Press the Menu key until the OSD menu disappears
The settings are permanently saved
HEIDENHAIN | User's Manual TFT-Monitor 12,1" | 06/2022
55